Special greetings to all the respectable members of Diyhub community, I hope your day is going very great today because mine is really moving very good 👍 too. I'm also using this wonderful medium to appreciate and thank all the members of this community for their supports and encouragement that I have been receiving from them infact I promise to also do the same to you all and by so doing we will all build the community prestige to a more higher level because a thousand miles begins with a single step. When many people join heads together they would always achieve a very successful result in the end of everything, I'm encouraging you all to keep on the good 👍 work because it would yeild a profitable result in the end of everything. So today was another creative and craftive day for me because I made a Standing fan with a movable and electric ⚡ fan inside of it, but how was it possible to make a standing fan that is rotating with speed?, read down 👇 to know how; But first here are some tools I used in creating it; 1). carton 2). Super glue 3). Tiger 🐯 battery 🔋 4). Pen 🖊️ 5). Scissors ✂️ 6). Motto fan 7). Black solo tape 8). Regulator 9). Small custard container 🫙 10). Rubber bind 11). Tiny electric wires METHODS OF PRODUCTION
1). In the first stage you will have to cut out a small part of the carton with a scissors ✂️ and then use a pen 🖊️ and the small custard container to draw a circle in the carton you have already cut out.
2). The second stage is to use a scissors ✂️ to cut out the round shape you have drawn from the carton.
3). The third stage is to measure and cut out small piece from a carton to form the curving area for the fan.
4). The fourth stage is to use a scissors ✂️ to make a small opening in the circle you have cut out.
5). The fifth stage is for you to cut out an area in the carton for making the stand of the fan.
6). The sixth stage is to measure out a small place in the carton for making the stand of the fan so that the regulator can fit into it the hole just like this;
7). The seventh stage is to use the small peice of carton that you have cut in the third stage to gum round in the circle that you have made a tiny hole in with the help of a super glue.
8). The eight stage is to form a smaller carton for wrapping the motto fan and then you will now use a super glue to gum it together with the circle you have cut out in stage two.
9). The ninth stage is to cut out another round circle using a scissors ✂️ and a small custard container and after that you will then use the scissors ✂️to shape out the fan and the casing from the round circle that you have cut out then after you will now join the fan and the motto fan together and then gum the peice of carton using a super glue.
10). The tent stage is to connect the wires with the regulator and then after you will now gum the standing fan carton together with a super glue.
11). The eleventh stage is to cut out another circle from the carton but this time around it is for the down 👇 part of the standing fan and you will then use the super glue to gum it together under the standing of the fan.
12). The twetht stage is to use the Black solo tape to wrap all round the standing fan so that it can look more nice 👍.
13). The thirteenth stage is to bind the Tiger 🐯 battery with a carton and the Black solo tape so that i would not fall out.
14). The fourteenth stage is for you to now connect the Tiny electric ⚡ wires together with the battery and them bind it using the Black solo tape to avoid falling out.
15). Then the fifteen stage, your standing fan with a movable and electric ⚡ fan inside is now ready to use.
Infact it was such alot of work done today in constructing such a thing like this.
All photos were taken by me with my Tecno spark 40 device.
Thank you all for stopping by my blog today, i really appreciate it.