Good evening great minds, trust your weekend is going well. Today I will show you how I made this jeans jacket.
All that you needed to make this are, tread, tape, chalk, scissor aiming gum, button, and ruler.
I started by folding the fabric by four and I gave out one inches allowance. That allowance will be at the front for the button.
Then I proceed by separating the two. And for the front I measure out two inches at the shoulder part from the top using the chalk and ruler to trace it and cut it out as u can see .
I cut out separate fabric in a V curve and sew it at the back side.
From there I proceed to join the back side and the front together then I cut out my hand pit.
After that I used the jean fabric to turn the front part outside and double press it, cause that's where the button will be, and I also fixed the pocket and it's cover.
After that I proceed to sew the collar by placing it inside the straight one I cut and sew it straight.
After that I proceed to put in the aiming gum inside the collar iron it and I fixed the collar and I have to start from the middle back side down to the front part.
And this is it.
After that I proceed to fixed the hand, and I make sure I double press each side of the hand side , then I proceed to shape the down and fixed the button and here is the final outcome.
Thank you for checking on my post.