How To Cut And Sew A Palazzo Trouser And A Crop Top

@jonathanjediel · 2025-05-22 14:09 · NeedleWorkMonday

Good afternoon hiver hope your day is going well? Today I will share with you how I made this palazzo trouser and a crop top.

IMG_20250522_134640_292.jpg

Materials needed.

Lining, your Ankara material, zip, breast part, chalk, tape, aiming gum, elastic rubber and scissor.

IMG_20250522_084900_632.jpg

Let's start with the trouser, first thing to do is to fold your material by two, measure out my waist and take your measurement from the waist down with ten inches and use your your chalk to trace it out and cut it out, then you measure from the waist to your knee point where your palazzo will start from and Then you cut it out. After that you place the first one you cut on the other side of the material and give at least one point five inches allowance, cause the back side of the trouser should be bigger than the front a little.

IMG_20250522_094520_125.jpg

I also cut out my waist barn, hand,and pocket.

IMG_20250522_144031-COLLAGE.jpg

Now you proceed to join the middle part of the trouser. After that then you put in your pocket by measuring four point five inches for the wideness and the length by five inches, after cutting it you place the part of the material for the pocket outside and see it after that you turn it inside and sew it round and then you iron it.

IMG_20250522_104135_210.jpg

Then I proceed to join the both part of the trouser, fixed the waist barn and the zip and the trouser is ready.

IMG_20250522_150527_410.jpg

Now moving to crop top, I started with the back by measuring my length by seventeen inches, and I removed six inches from the top side cause it's an off shoulder, and I cut the back length by three inches.

IMG_20250522_094359_912.jpg

Then I proceed to the front which is the breast part, I started by measuring the length by twenty two inches, measure out my breast point and place the first part I cut on the other side of the material and cut the side.

IMG_20250522_094440_630.jpg

I also cut out the breast part.

IMG_20250522_094837_901.jpg

After that I cut out my lining for the top. I proceed to start with the front by fixing the breast part on the material for each part before joining it.

IMG_20250522_110849_689.jpg

After joining the breast part, I also sew my lining separate from the Ankara before joining it, after joining I trimmed it to have a round shape at the front then fix the lining, and also fix lining for the back, and for the front I used my aiming gum for front to iron it then gum it very well.

The back.

IMG_20250522_120517_691.jpg

The front

IMG_20250522_120452_219.jpg

After that I proceed to join the both part together, fixed the zip, and I proceed to fixed in the elastic rubber for the hand, both the upper side and down part, and the crop top is ready.

IMG_20250522_150613_070.jpg

Here is the cloth on her.

IMG_20250522_134625_978.jpg

IMG_20250522_134702_652.jpg

IMG_20250522_134619_871.jpg

#needlework #sewing #tutorial #community-update
Payout: 0.000 HBD
Votes: 271
More interactions (upvote, reblog, reply) coming soon.