Repairing the door gap [Esp/Eng]

@rsanchez0308 · 2025-08-16 22:45 · Home Solutions
Hello friends at hive and @home.solutions, I hope you are all doing well. Today I am going to tell you about a little problem at home. For a few weeks now, the front part of the door to the area of the house where we live (since we share the house with my mother-in-law) has been scraping the floor when you open it, but lately it has gotten worse to the point that when you push the door, it sticks to the floor and you have to lift it up a little.
ESPAÑOL

Hola amigos de Hive y @home.solutions, espero que todos se encuentren muy bien, hoy les paso a contar un problemita que estaba pasando en la casa. Desde hace unas semanas la parte de adelante de la puerta de la entrada al área de la casa dónde vivimos, ya que compartimos la casa con la suegra, está rozando el piso cuando uno la abre, pero en estos días se ha puesto peor hasta el punto que cuando uno empuja la puerta está se queda pegada del piso y hay que levantarla un poco.

![](https://images.ecency.com/DQmWgwVmLb7PPSBHAr6EmR4RjyrkjTRL5QoKxsb3BQteBhq/1755384485733.png) https://images.hive.blog/DQmTphUarKuYr5DZnpue1jqNXi6kg3s7koZrrYxYfaQvyGe/18.png Normally, almost all the pins on the hinges of that door tend to rise when the door is opened and closed, and I use a hammer to tap them back into place, which improves the door, but it still rubs against the floor. So I decided to fix that problem once and for all. At first, I thought about taking the door apart and sanding the bottom of it, but that door is quite heavy and handling it would be cumbersome and take me longer to solve the problem. Then I thought about putting something between the hinge and the door frame to lift it up a little and see if that would improve it.
ESPAÑOL

Normalmente casi todos los pasadores de las bisagras de esa puerta tiende a subirse con el abrir y cerrar de la puerta, y con un martillo le doy unos golpes para volver a meter los pasadores y la puerta mejora, pero mantiene el roce en el piso. Así que me propuse arreglar definitivamente ese problema, primero pensé en desmontar la puerta y lijar en la parte inferior de la misma, pero esa puerta es algo pesada y su manipulación iba a ser algo engorroso y me tardaría más en solucionar el problema, entonces pensé en colocarle algo entre la bisagra y el marco de la puerta para que levantará un poco y ver si así mejoraba.

![](https://images.ecency.com/DQmV8axeai45PuwGNF4PVUrMZUhfbDzNhSJaVroyvFCcwM9/1755383913265.jpg) ![](https://images.ecency.com/DQmTbV6PnyCACfyWanuU7V1dVnAhbRDNEQodswnTAtEXmqr/1755383913395.jpg) https://images.hive.blog/DQmTphUarKuYr5DZnpue1jqNXi6kg3s7koZrrYxYfaQvyGe/18.png I looked around the house and found a piece of hard cardboard that would work. I found a pair of scissors and cut the cardboard to size, then used a Phillips screwdriver to remove the screws from the bottom hinge, the one that faces the door frame. I placed the cardboard, put the hinge back in position, and screwed the screws back in. I tested it and it no longer stuck when the door was opened slightly, but when I tried to open it completely, it stuck to the floor and got stuck. So I did the same procedure with the same hinge, but on the side that holds the door. I put the cardboard on it, but it still stuck slightly to the floor, so I removed the hinge again and placed another piece of cardboard, but thinner, then reinstalled the hinge, tested it, and the door was perfect. I could open the door completely without it rubbing against the floor.
ESPAÑOL

Me puse a revisar en casa y encontré un pedazo de cartón duro que me podía servir, busque una tijera y corte a la medida el cartón, luego con un destornillador de estría saque los tornillos de la bisagra de abajo, la que da hacia el marco de la puerta, coloque el cartón volví a ubicar la bisagra en su posición y atornille los tornillos. Hice la prueba y ya no pegaba cuando se abría un poco la puerta, pero cuando intentaba abrirla completamente está pegaba del piso y se quedaba trancada, entonces hice el mismo procedimiento con la misma bisagra, pero con el lado que sujeta la puerta, le coloque el cartón pero aún pegaba levemente del piso, así que volví a despegar la bisagra y le coloqué otro pedazo de cartón pero más delgado, luego volví a instalar la bisagra, hice la prueba y la puerta quedo perfecta, podía abrir completamente la puerta sin que rozara del piso.

![](https://images.ecency.com/DQmXjqKVBMBjHyt8B6fpK5uwoUYCnPhDN2ReuivwpVrfhz9/1755383913582.jpg) ![](https://images.ecency.com/DQmUd5vDumpnSFZ8UtBihsmcmQYDhxRpCX7qDiwMkLZL8Bc/1755383913444.jpg) ![](https://images.ecency.com/DQmTEqXQMviwXhJfM4BP1rR4ZxXa1SU76gNhrTmrSKzP8oz/1755383913344.jpg) ![](https://images.ecency.com/DQma8qkmavLkwYBmccX5i1AbYGzawWk9mSLw8TGR2vykUeY/1755383913492.jpg) ![](https://images.ecency.com/DQmSpbnmGDp114jzxPTZuHwM8vFFSHSbkdTE3yKnck4PE1h/1755383913629.jpg) https://images.hive.blog/DQmTphUarKuYr5DZnpue1jqNXi6kg3s7koZrrYxYfaQvyGe/18.png That solved the problem with the door. Now I can open it completely without it sticking to the floor. Well, friends, I wanted to share this with you. See you next time.
ESPAÑOL

Así quedó resuelto el problema con la puerta, ya la puedo abrir completamente sin que pegue del piso, bueno amigos quise compartir esto con ustedes y hasta otra oportunidad.

Fotos
https://images.hive.blog/DQmPp3w4d7XKqyHe7ehy2vRmWfJDa3A7FvafWG3WpoLJcc5/11.png
*Photography|Fotografía: por @rsanchez0308, Cover created in/Portada creada en [Canva](https://www.canva.com), [Separator and banner/separador y banner](https://hive.blog/hive-148441/@ikasumanera/eng-es-i-made-hive-free-use-art-of-for-all-of-you-part-1-dividers-and-banners-or-hice-arte-de-libre-uso-para-todos-parte-1), Translated with www.DeepL.com/Translator (free version)*
#hive-108539 #repairing #spanish #housework #diy #home #reparacion #neoxian #cteativecoin #palnet
Payout: 5.987 HBD
Votes: 331
More interactions (upvote, reblog, reply) coming soon.